Description

ECU V1(Firmware Rev 12, Board Rev 2.0 )

The product is only available till stocks last. It is no longer being manufactured

This board is based on ESP32 microcontroller and comes with ECU Firmware 12 pre loaded.

For a fully functional controller you will need to add ESC’s (Electronic Speed Controllers) for Starter Motor and Fuel Pump. You will also need to add a module to drive Glow plug or kero plug. In addition you will need to use a max31855 K type thermocouple and sensor board to connect to ECU for temperature measurement. It takes RPM input as a 3.3-5volt square wave and can work with 1 pulse per revolution or 2 pulse per revolution RPM sensors. The type of sensor can be selected from setting menu.

The ECU settings can be modified and sensor data can be monitored through a built in WiFi Web Server.

ECU Guide: ECU Rev11 Guide